Virtual University of Pakistan Study forum !
Instructions: Please read the following instructions carefully before submitting assignment: You need to use MS Word document to prepare and submit the assignment on VULMS. It should be clear that your assignment will not get any credit if: The assignment is submitted after due date.
Objective: The objective of this assignment is to learn about: Transmission Impairments


Tags:
okay :)
SOLUTION IDEA
Question No. 1
Imagine a signal (P1) travels through an amplifier and its power is increased 20 times. This means that P2 (the amplified signal) =20P1.
You are required to calculate the amplification (gain of power) by writing all necessary calculations and formula.
Answer:
How to calculate signal amplification
Formula for Signal Amplification: 10 log (P2/P1)
Putting the above values,
= 10 log (20P1/P1)
= 10 log (20)
= 13 dB.
Question No. 2
Suppose that S/N i.e. signal to noise ratio = 34dB and bandwidth of the channel is 2 kHz. You are required to calculate the theoretical channel capacity in bps by writing all necessary calculations and formula.
Answer:
How to calculate Channel Capacity
Formula for Channel Capacity = B log base 2 (1 + S/N ) in bps
Here,
B = Bandwidth of the channel = 2 kHz = 2000 Hz
S/N = Signal to Noise ratio = 34 dB = 2511
Putting the values in the formula:
= 2000 log base 2 ( 1 + 2511)
= 22,589 bps
solution assigment no 3 cs601
??? solution
idea solution
Posted by +★άŋŋäŷɑ̃ ʛʊ̈ɭɭ★ on July 16, 2017
Posted by ++*@Hania Eman @*++ on July 7, 2017
Added by + ★☺caмe4ѕтυdιeѕ☺★
Added by + ★☺caмe4ѕтυdιeѕ☺★
Added by N!da RaNa
Added by N!da RaNa
Added by + ★☺caмe4ѕтυdιeѕ☺★
Added by + ★☺caмe4ѕтυdιeѕ☺★
© 2017 Created by Muhammad Anwar Tahseen. Powered by
© Copyright VUHelp Developed By Muhammad Anwar Tahseen ......................................................................................................... Designed By Inam Khan